|
|
NEW Online Training
“After sitting through
only two of the course sessions, I went back and looked at some of my
past feasibility studies. Using the information that I had learned
so far, I was able to optimize the systems and cut as much as 15% off
the previous bore field lengths. The information presented in the
course not only helped me to better understand the GLD modeling program,
but also answered some of my longstanding questions about geothermal
systems in general. I am very happy with everything that was
presented and would recommend the course to anyone who is planning on
using the software for their geothermal modeling.”
Antares Group Inc.
GLD2016 Training - Loopfields and Piping Design
- Web Workshop Series
Thermal Dynamics, in conjunction with the Geothermal Training Institute, is currently offering a new web workshop series entitled, "GLD2016 Training - Loopfields and Piping Design." The objective of this series is to provide the geothermal designer with a working knowledge of GLD2016 to design and optimize a geothermal system. Examine the critical phases of the loopfield design, by importing building and modeling loads and configuring a loopfield. Correctly match the heat pump between the building and loopfield to develop a complete system. Design a piping system using the revolutionary piping design system to create systems that are balanced and purgeable.
Utilizing the industry leading Ground Loop Design (GLD) 2016 Software Suite, this series will show how to use the design and simulation power of the software in the preparation of realistic designs for different situations, including a full session dedicated to presentation of example designs from the instructor as well as looking at some actual system designs from the course participants. Two-way interaction with an expert instructor provides the geothermal professional with the tools he or she needs to use GLD 2016 with confidence.
Each session runs approximately three (3) hours
Below is the syllabus for the web workshop training:
- Session 1: Loopfield System with GLD 2016
- Part 1: Groundloop Design Overview; Design Principles
- Part 2: Loads, Loads Modules and Heat Pumps
- Part 3: Heat Exchanger Design – Vertical; Horizontal
- Part 4: Life Cycle Costing
- Session 2: Piping Configuration with GLD 2016
- Part 1: Piping system basics
- Part 2: The Importance of a Well Designed Piping System
- Part 3: Using the Computational Fluid Dynamics (CFD) Module
- Session 3: Exercise Lab w/Student Data and Examples
- Part 1: Example System Designs and Simulations
- Part 2: Discussion of project data from Students with feedback
